English
Hangzhou Ruide Machinery Co., Ltd. is an enterprise with professional strength in the field of ultra-high pressure hydraulic tool machinery. Hydraulic Torque Wrenches Manufacturers in China. The company is committed to providing customers with high-quality and innovative hydraulic machinery solutions. With years of industry experience and professional knowledge, we have demonstrated outstanding capabilities in hydraulic design, manufacturing, and maintenance. The various hydraulic pumps, hydraulic wrenches, hydraulic tensioners, hydraulic jacks and other tools produced by the company are widely used in different fields such as wind power, petroleum, chemical industry, construction, nuclear power, etc. From standard hydraulic tools to large non-standard equipment, our products are praised by customers for their reliability and high performance. The company has a highly qualified and experienced team, including engineers, technicians, and managers. In addition, the company also provides high-quality after-sales service to ensure continuous customer satisfaction. The company focuses on technological innovation and continuously invests resources in research and development to meet the ever-changing market demands. Wholesale Hydraulic Torque Wrenches. Always adhere to strict quality control standards to ensure that every product meets or exceeds customer expectations.
Founded in
Factory area
Number of Employees
Projects
A torque wrench pump that rattles like it is full of gravel, a gauge needle that jumps instead of holding steady, or a tensioner that creeps after the pressure is set—these are familiar signs of air in hydraulic fluid. ...
READ MOREA pressure dew point that creeps up two or three degrees over eighteen months is rarely a refrigeration fault. In most industrial compressed air dryers, the cabinet, the refrigerant compressor and the controller outlive...
READ MOREThe Core Purpose of a Hydraulic Torque Wrench A hydraulic torque wrench is primarily used for tightening or loosening large, high-strength bolts with extreme precision and force. Unlike manual tools, it utilizes hydraul...
READ MOREThe Critical Role of Hydraulic Torque in Industrial Bolting Hydraulic torque wrenches are the definitive solution for achieving high-precision, high-torque bolted connections in demanding industrial environments. Unlike...
READ MOREHangzhou Ruide Machinery Co., Ltd. builds ultra-high pressure hydraulic tooling in Hangzhou, Zhejiang, and the hydraulic torque wrench family is one of our core product lines. We manufacture drive-type, hollow cassette, ultra-thin hollow, front reaction arm and electric torque wrenches, and we supply the pumps, hoses, sockets and reaction accessories that turn a single tool into a working bolting system.
Our wrenches are deployed where large high-strength bolts must be tightened or released to a controlled value: wind turbine towers and pitch systems, petrochemical pressure vessels and process piping, power infrastructure, mining equipment, marine propulsion and heavy structural connections. As a Hydraulic Torque Wrench manufacturer, we deliver both catalogue tools and non-standard configurations developed from customer drawings or samples.
Six configurations cover the drive and access conditions found on large bolted joints. All hydraulic families share the same 700 bar platform, so one pump can serve several wrench sizes across a project.
| Model family | Working principle | Torque coverage | Fastener range | Best-fit access condition |
|---|---|---|---|---|
| WA drive-type | Interchangeable square or hex drive shaft with reaction arm | 112–34,725 Nm across nine models | M14–M100, drive shafts 3/4" to 2-1/2" | Open flanges, structural bolting, general maintenance |
| WB hollow cassette | Thin hollow ring drives directly on the nut face, no separate socket | 232–44,593 Nm | Nut centre-to-centre distance 19–175 mm | Limited bolt stub height, large flange bolt circles |
| WBT ultra-thin hollow | Hollow nut engagement in a reduced overall profile | 232–139,463 Nm | Nut centre-to-centre distance 36–190 mm | Close-pitch bolt circles, compact housings, blind flanges |
| Front reaction arm | Reaction arm braced ahead of the fastener | Configured to the joint | Configured to the joint | Joints where the only reaction point sits forward of the nut |
| Plug-in electric | Mains-powered electric drive | Configured to the joint | Configured to the joint | Production tightening where mains power is available |
| Cordless electric | Battery-powered electric drive | Configured to the joint | Configured to the joint | Remote sites without mains or compressed air |
The WA Drive-type Hydraulic Torque Wrench is the general-purpose workhorse for standard flanges and structural joints. Where bolt protrusion is short or the tool must sit low against the nut, the hollow cassette families take over, and the WBT Ultra-thin Hollow Hydraulic Torque Wrench extends that capability into the tightest bolt circles we are asked to reach.
Selection begins with the fastener, not the tool. Bolt diameter and grade set the target torque; nut across-flats and bolt protrusion decide whether a drive-type or hollow cassette will physically seat; the surrounding structure decides where the reaction arm can be braced.
The hydraulic families share a common specification base, which simplifies tooling and spares across a mixed fleet.
A torque wrench is only as consistent as the pressure supply behind it. We build the matching Hydraulic Wrench Pump range for the WA, WB and WBT families, and we size the pump by flow rate, pressure setting and the number of wrenches that must run from one unit.
For multi-bolt work we configure distribution manifolds and hose sets so several wrenches can operate from a single power pack without pressure loss at the tool. Electric, pneumatic and manual drive options are available across the pump range, and control platforms with digital display and data recording are used where tightening records must be archived for handover documentation.
We apply full-process quality management: inspection follows each production stage, and finished tools are 100% inspected against the customer's requirements and the applicable international standards before packing. Certificate documentation is issued with the shipment.
A quotation that can be built without follow-up questions usually comes from the following project data. Where a drawing or a sample bolt is available, we work from that directly.
Commissioning is straightforward: connect the CEJN couplings, purge air from the circuit, set the pump pressure to the value stated for the selected model, and confirm the reaction arm seating before the first working stroke. Hose routing should keep the swivel fitting free to rotate through its full 360° × 180° travel.
Serviceable items include ratchet pawls, drive shafts, cassette rings, seal kits, reaction arms, sockets and quick-release couplings. We supply these as individual spares so a fleet can be maintained without replacing complete tools, and we support torque re-verification at intervals agreed with the operator's bolting procedure.
The WA drive-type family spans 112–34,725 Nm, the WB hollow cassette family spans 232–44,593 Nm, and the WBT ultra-thin hollow family spans 232–139,463 Nm. The correct model is chosen from the target torque and the physical clearance at the joint, not from the maximum figure alone.
Our hydraulic torque wrenches are rated at ±3% torque accuracy across their working range, which is what makes them suitable for pressure vessel closures, turbine casing bolts and structural connections where consistent preload matters.
We match the pump to the wrench model, the number of tools running simultaneously and the cycle time required. Hollow cassette models operate at up to 700 bar, and the pump pressure setting is fixed to the value stated for the selected wrench so the torque output stays inside the accuracy band.
Customized production is a core part of our business. We develop and manufacture from customer drawings or physical samples, which covers special reaction arms, modified cassette rings, non-standard drive shafts and complete tools for joints that no catalogue model reaches.
Inspection follows every production stage, and each finished tool is 100% inspected against the customer's requirements and international standards. Pressure and function testing is carried out on the matched pump, and certificate documentation accompanies the delivery.
Yes. Wrenches can be supplied as complete bolting sets with sockets, reaction arms, hose assemblies, CEJN couplings and the matched pump, or as individual tools where the customer already operates a compatible hydraulic circuit.