English
Hangzhou Ruide Machinery Co., Ltd. is an enterprise with professional strength in the field of ultra-high pressure hydraulic tool machinery. High-Pressure Hydraulic Pumps Manufacturers in China. The company is committed to providing customers with high-quality and innovative hydraulic machinery solutions. With years of industry experience and professional knowledge, we have demonstrated outstanding capabilities in hydraulic design, manufacturing, and maintenance. The various hydraulic pumps, hydraulic wrenches, hydraulic tensioners, hydraulic jacks and other tools produced by the company are widely used in different fields such as wind power, petroleum, chemical industry, construction, nuclear power, etc. From standard hydraulic tools to large non-standard equipment, our products are praised by customers for their reliability and high performance. The company has a highly qualified and experienced team, including engineers, technicians, and managers. In addition, the company also provides high-quality after-sales service to ensure continuous customer satisfaction. The company focuses on technological innovation and continuously invests resources in research and development to meet the ever-changing market demands. Custom Hydraulic Power Pumps. Always adhere to strict quality control standards to ensure that every product meets or exceeds customer expectations.
Founded in
Factory area
Number of Employees
Projects
A torque wrench pump that rattles like it is full of gravel, a gauge needle that jumps instead of holding steady, or a tensioner that creeps after the pressure is set—these are familiar signs of air in hydraulic fluid. ...
READ MOREA pressure dew point that creeps up two or three degrees over eighteen months is rarely a refrigeration fault. In most industrial compressed air dryers, the cabinet, the refrigerant compressor and the controller outlive...
READ MOREThe Core Purpose of a Hydraulic Torque Wrench A hydraulic torque wrench is primarily used for tightening or loosening large, high-strength bolts with extreme precision and force. Unlike manual tools, it utilizes hydraul...
READ MOREThe Critical Role of Hydraulic Torque in Industrial Bolting Hydraulic torque wrenches are the definitive solution for achieving high-precision, high-torque bolted connections in demanding industrial environments. Unlike...
READ MOREIndustry Knowledge
As a Hydraulic Pump manufacturer, Hangzhou Ruide Machinery Co., Ltd. builds the ultra-high pressure power sources that drive bolt tensioners, torque wrenches, hydraulic jacks and power-tool circuits. Our range covers electric, pneumatic and manual drive types, with working pressures up to 700 bar and flow configurations from single-speed to three-stage automatic switching. Every unit is pressure-tested and calibrated at the factory before shipment.
These pumps work in wind power, petrochemical, power infrastructure, heavy mining, marine engineering, bridge construction and nuclear power projects, where a stable high-pressure supply determines whether a bolted joint, a lift or a crimp reaches its specified value.
Five pump families cover the tool types we manufacture and the tools already in service on site. They share one hydraulic design and manufacturing base, so a project can be supplied with matched pumps, tools and accessories from a single source.
| Pump family | Drive options | Output character | Tools driven | Typical applications |
|---|---|---|---|---|
| Bolt Tensioning Pump | Brushless electric, electromagnetic, pneumatic direct-drive and booster explosion-proof | High output pressure for large high-strength bolts; simultaneous multi-tensioner operation | Hydraulic bolt tensioners | Wind turbine tower bolting, pressure vessel and flange assembly, pipeline maintenance, boiler and turbine overhaul |
| Hydraulic Wrench Pump | Three-stage electric, brushless, intelligent, explosion-proof electric, pneumatic, economical electric | Three-stage automatic flow switching; single-unit or multi-wrench operation | Hydraulic torque wrenches | Wind power, oil and gas flange joints, pressure vessels, power tower assembly, mining overhaul, shipyard installation |
| Power Tool Special Hydraulic Pump Factory in China | Dual-circuit dual-speed, enhanced-flow dual-speed, three-stage high-power electric | High-low pressure automatic switching; single-acting and double-acting tool support | Crimping tools, cutters, punches, busbar benders, aerial hydraulic equipment | Substations, photovoltaic and wind plants, railway electrification, switchgear installation, cable engineering |
| Hydraulic Jack Pump | Electric and pneumatic | Controlled lifting and holding circuits | Hydraulic jacks | Heavy lifting, structural installation, maintenance and rigging |
| Manual Hydraulic Pump | Hand-operated | Low-flow, intermittent duty without a power supply | Tensioners, jacks and small hydraulic tools | Field work, remote sites, commissioning |
Pump selection is fixed by the tool at the end of the hose, not by the pump alone. We confirm the following points against the tool data sheet before a configuration is released.
Control depth scales with the joint record a project has to keep. The TPI PLC data-recording intelligent tensioning pump adds a high-sensitivity HD digital display and data recording to the proven TP platform, while the TPD brushless remote-control electromagnetic pump and the WPI intelligent electric wrench pump move operation away from the pump body. We configure the control system around the required line interface, whether that is a pendant, a remote handset or a PLC signal into a station control cabinet.
For power-tool circuits, the EP3 dual-circuit dual-speed, EP6 enhanced-flow and EP12 three-stage high-power pumps use high-low pressure automatic switching and flexible valve arrangements to serve single-acting and double-acting tools from the same unit.
We apply full-process quality management: inspection follows each manufacturing process, and finished pumps receive 100% final inspection against customer requirements and international standards. Each unit then undergoes full factory pressure testing and calibration before shipment, so pressure settings, stage switching and valve response are verified on the assembled pump rather than on components alone.
Installation is straightforward when the utilities are right. Electric units need a supply matched to the motor rating with suitable protection; pneumatic units need dry, filtered compressed air at adequate flow, since moisture and pressure drop are the usual causes of slow or erratic cycling. Hydraulic oil cleanliness, correct coupler and hose rating, reservoir fill level and full air bleed are checked before the first pressure setting is verified against the tool.
A proposal is built from the working point, the material and the production target. The table below lists what we need from a project to fix the pump model, valve arrangement and delivery scope.
| Project input | What it determines |
|---|---|
| Tool type, model and rated working pressure | Pressure setting, valve type and safety margin |
| Number of tools operated at the same time | Outlet port count, manifold arrangement and reservoir capacity |
| Required cycle time per tool | Low-pressure and high-pressure stage flow |
| Drive preference and available power supply | Motor rating, voltage, phase, or compressed-air consumption |
| Control and data-recording requirements | Pendant, remote control, PLC interface and display options |
| Environment and area classification | Explosion-proof or standard configuration, ambient and ingress protection |
| Hose length, coupler and thread standard | Hose and coupler supply, and oil volume in the circuit |
| Mounting, frame or trolley requirement | Base configuration, weight distribution and lifting points |
| Documentation, marking and packaging | Test records, labelling and delivery scope |
Our pump range is built for ultra-high pressure service, with working pressures up to 700 bar across the electric, pneumatic and manual families. Bolt tensioning pumps are configured for the higher output pressures that large high-strength bolts require, and the final setting is matched to the rated working pressure of the tensioner supplied with the pump.
Yes. Bolt tensioning pumps support simultaneous multi-tensioner operation, and wrench pumps are available in single-unit or multi-wrench operation modes. The number of outlet ports, the manifold arrangement and the reservoir capacity are fixed by how many tools must be pressurised at once and how often the cycle repeats.
We build the TPR explosion-proof direct-drive pneumatic tensioning pump, the TPS explosion-proof booster pneumatic tensioning pump and the WPB explosion-proof electric wrench pump. The pneumatic units operate entirely on compressed air and produce no electrical sparks, which suits refineries, tank farms and other classified areas.
Inspection follows each manufacturing process, and every finished pump receives 100% final inspection against customer requirements and international standards. Each unit then goes through full factory pressure testing and calibration, covering pressure setting, stage switching and valve response on the assembled pump.
Customized production is a core part of our business. We develop and manufacture from drawings or samples you provide, alongside the standard pump families listed above, and we supply matched tools, hoses, couplers and spare parts for the same project. Hangzhou Ruide Machinery Co., Ltd. is located in Linping District, Hangzhou, with direct access to Ningbo Port for sea freight and to Ningbo and Shanghai airports for urgent air shipments.